SSS
Merak edilenleri sizin için yanıtladık. Sorunuzun cevabını bulamazsanız bize ulaşın.
The process consists of determining the target effect, preparing appropriate visuals, processing the images according to the lenticular structure, printing and lens alignment, and quality control stages. The effect to be used, product size, viewing distance, and number of visuals directly affect each other. For the best result, design files are evaluated by the Unilens technical team before production.
Strong contrast, similar composition, correct framing, and readable typography should be preferred among visuals. Very thin texts, disconnected scenes, low-resolution visuals, and large white areas can lead to undesired ghosting or image bleeding. The effect type and viewing direction should also be determined according to the actual usage conditions of the product.
Durability depends on the lens used, printing system, product structure, bonding method, and usage environment. Conditions such as indoor use, outdoor use, heavy contact, temperature, humidity, and direct sunlight must be shared at the beginning of the project. Unilens creates material and application recommendations based on these conditions; the final durability commitment is clarified on a product and project-specific basis.
The basic principles of the design depend more on the product size, effect type, and usage environment than the production quantity. However, in high-volume projects, color, cutting, assembly, and packaging standardization become more critical. It is recommended to perform technical checks before mass production and to obtain samples or production approval when deemed necessary.
It must be submitted with high-resolution and layered source files. Text bleed margins, safe areas, color structure, and visual hierarchy should be prepared according to the product dimensions. Technical measurements and the file delivery format are shared specifically for the project after the product and effect are finalized.
Depending on the project's goal and application area, sales support content explaining the effect of the lenticular technique, product options, and application examples can be prepared. The scope of the presentation is determined based on whether it will be used for a customer meeting, campaign proposal, or internal approval. The sharing of current examples and references is subject to confidentiality and usage permissions.
Yes. Product form, lenticular effect, printing, color, packaging, and usage scenarios can be tailored together according to brand objectives. A commitment to "fully custom production" is not made without evaluating technical feasibility, cost, and production quantity; the scope of the solution is clarified following the project brief.
Depending on the product and project, physical samples, print proofs, or digital visualization options can be evaluated. Whether the sample is paid, the sample duration, and potential tolerances with mass production are explained during the quotation stage. Which sample will be used as the reference for mass production approval must be determined in writing.
The minimum production quantity varies depending on the product and the printing or personalization method to be applied. Once you select the product and the desired application, the minimum order quantity specific to the product will be communicated to you.
Following needs analysis and product selection, technical requirements are clarified; the design control, pricing and approval process is completed. Depending on the project, samples or digital proofs can be obtained. After approval, the production, quality control, packaging and shipment stages are initiated.
Yes. Unilens develops project-based product and visibility solutions according to the target audience, touchpoint, budget, delivery schedule, and brand standards. The process is not limited to product supply; when necessary, ideation, productization, design adaptation, production, and shipment steps are planned together.
The request is received along with the product, quantity, size, printing or personalization needs, location of use, and target delivery date. A quote is provided after technical and commercial evaluation; once design and production approvals are completed, the order is put into production. Quality control is carried out in accordance with the project scope prior to shipment.
Production and delivery times vary depending on the product. After evaluating the product type, order quantity, printing or personalization method, sample requirement, and stock status, project-specific delivery terms will be communicated to you.
The delivery method is determined based on product volume, number of packages, delivery address, and schedule. For suitable projects, cargo, courier, warehouse, or logistics solutions can be used. The scope of freight, delivery method, insurance, and liability points are clarified during the quotation stage.
Yes. Bulk orders are evaluated on a project basis in terms of production planning, unit cost, packaging, and shipment. It is possible to use different designs in the same order; however, the minimum quantity, mold, printing, and approval requirements for each design are checked separately.
A promotional product is an item chosen to support a brand's visibility, recall, or a specific communication goal, and is mostly personalized with brand elements. Effective promotion is not just an item with a printed logo; it is a contact tool tailored to the target audience, context of use, and brand message.
Customer loyalty, employee experience, sales campaigns, dealer communications, product launches, trade fairs, events, field activations, and brand recall are the main purposes of use. The right product selection should be correlated with the distribution purpose and the expected behavior.
Suitability depends on the target audience's lifestyle, frequency of use, brand positioning, budget, and distribution channel. Office products, textiles, drinkware, tech accessories, bags, notebooks, pens, personal care products, and custom sets can be considered. Product safety and technical compliance must be confirmed for the specific product chosen.
Yes. An existing product can be personalized with a logo, color, print, packaging, or set configuration; brand-specific product development can also be evaluated for suitable projects. The level of customization is determined based on quantity, budget, production method, and timeline.
Yes. Themes, products, packaging, and distribution structures can be created according to product launches, sales campaigns, seasons, special days, or loyalty programs. If the campaign date is fixed, sufficient preparation time must be allocated for product research and the sampling process.
If the product surface and material are suitable, the logo can be applied using methods such as printing, transfer, UV printing, pad printing, laser, embroidery, or similar techniques. The most suitable technique is chosen by considering the color structure of the logo, application area, durability expectations, and quantity.
When technical and commercial feasibility is ensured, brand-exclusive forms, materials, colors, functions, and packaging structures can be developed. Such projects may require a longer development time and higher minimum quantities than standard catalog products. The scope, prototype, and intellectual property conditions must be clarified in writing at the beginning of the project.
The minimum order quantity for promotional products varies depending on the product and the personalization method to be applied. Once the product selection and printing details are finalized, the minimum order quantity for the relevant product will be communicated to you.
The production and delivery time of promotional products varies depending on the product. After evaluating stock availability, order quantity, printing technique, sample, and packaging requirements, product-specific lead time information is shared.
Yes. Colors, typography, logo usage, messaging tone, product selection, and packaging can be handled within the framework of corporate identity. Since color matches may vary depending on the material and printing method, critical colors must be approved via samples or proofs.
Many products with a suitable surface for printing or embroidery can be personalized. The product inventory includes stationery, textiles, bags, drinkware, tech accessories, desktop items, and custom box/set options. The exact application area and method are checked on a product basis.
Depending on the product material and design suitability, different personalization methods including printing, laser marking, and embroidery can be considered. Not every technique yields the same result on every product; appearance, durability, number of colors, dimensions, and quantity are analyzed together.
Yes. Box, separator, sponge, card, sleeve, or bag solutions that protect the product and increase presentation value can be developed within the scope of the project. The dimensions, material, printing, transportation conditions, and unboxing experience of the packaging are planned together.
For eligible products, options such as unprinted product samples, printed samples, prototypes, or digital visualization can be offered. The sampling method, cost, and duration vary on a product basis. Which features the sample approval binds in mass production are determined before placing the order.
Yes. For high-volume projects, supply, production, quality control, packaging, and shipping capacities are planned together. If there is a need for phased delivery or shipment to different locations, this information should be shared before the quote.
Yes. Alternatives can be developed at different levels of material, product, personalization, and packaging for the same communication purpose. Instead of focusing solely on the lowest unit price, utility value, visibility, delivery risk, and total project cost should be evaluated together.
Yes. Employee sets can be designed based on onboarding, tenure, achievement, birthdays, special occasions, remote work, or in-house events. Product selection is made in line with the corporate culture, employee profile, budget, and distribution plan.
Yes. Product and packaging structures can be prepared based on the customer segment, the nature of the relationship, brand positioning, and the purpose of the gift. Creating tiered set alternatives under the same umbrella for different customer groups can also be evaluated.
Yes. Welcome Kits aligned with the brand language can be prepared for welcoming employees, dealers, business partners, members, or customers. The set can be designed with informational materials, daily use products, textiles, stationery, tech accessories, and special packaging.
Yes. Thematic sets can be developed for holidays, New Year's Eve, Women's Day, Mother's Day, Father's Day, and organization-specific dates. Since stock and production capacities can change rapidly during busy periods, the planning and approval process should be started early.
Yes. Product selection, box, internal layout, message card, logo application, and recipient-specific details can be personalized. The term "VIP" should encompass not only the price, but also product quality, presentation, craftsmanship, brand alignment, and delivery experience.
Yes. Products can be selected based on the visitor profile, booth message, distribution method, ease of transportation, and the targeted memorability impact. Different product tiers can be structured for the purpose of attracting attention at the booth, distinguishing qualified visitors, and maintaining post-fair communication.
When suitable for the project, options such as recycled content, recyclable material, natural fiber, long-lasting product, or reduced packaging can be preferred. Environmental claims must be based on verifiable documentation; unproven statements should not be used as definitive claims in marketing copy.
Under appropriate product and supply conditions, options using recycled content can be offered. Material ratio, certificate scope, color, and surface differences may vary on a product basis. This information must be confirmed with supplier documents prior to the order.
Yes. Sets can be curated using principles such as long-lasting products, reduced or recyclable packaging, elimination of unnecessary components, and local sourcing. The most accurate approach is not merely bringing together products with an "eco" label, but improving the total life cycle and real utility value of the set.
Yes. Products can be developed by taking into account the event theme, guest profile, stage or venue usage, and social media visibility. For events with unchangeable dates, a safe time buffer must be left for approval, production, and shipping.
High-volume requests can be planned on a project basis in terms of capacity, product standardization, packaging, field distribution, and delivery schedule. Capacity commitment is not given without selecting the product; it is confirmed based on quantity, location, and date information.
Yes. Promotional products tailored to the event concept can be developed, incorporating specific colors, forms, functions, lenticular effects, packaging, or interactive ideas that carry the event's message. We evaluate not only the visual appeal of the concept but also how participants will use the product and through which behaviors they will connect with the brand.
More responsible options can be evaluated in terms of material, reuse, durability, packaging reduction, and sourcing approach. However, the term "sustainable" on its own is not sufficient; material declarations, certificates, and supplier evidence must also be examined on a product-by-product basis.
Multi-address shipping can be planned within the scope of the project. Needs such as the number of addresses, data format, individual packaging, labeling, proof of delivery, and return management must be clarified prior to the quotation. Personal data must be processed only within the necessary scope and with appropriate security measures.
Shipment throughout Turkey can be organized on a project basis. The scope of service varies depending on the product type, package volume, address accessibility, and carrier conditions. Additional conditions such as remote areas, special delivery times, or floor delivery must be notified in advance.
International shipping options can be evaluated based on country, product, quantity, customs classification, and delivery terms. Freight, taxes, customs clearance, importer responsibility, and required documents must be clarified prior to the order. The exact delivery time depends on transportation and customs conditions.
Yes, for suitable projects, a distribution plan can be created for branches, dealers, stores, event points, or individual addresses after central production. Package contents, quantity breakdowns, labeling, shipping lists, and delivery reporting must be clearly defined in the operation plan.
1996
Ömer Yamak
Specialization in the lenticular field; manufacturing experience dating back to 1996; end-to-end management of design, interlacing, lens selection, printing, cutting, and application; a wide range of solutions extending from small promotional products to large-format physical communication media; developing tailor-made projects for specific brands and touchpoints.
30 yıllık üretim/sektör deneyimi.
Unilens has a daily production capacity of 28,000 m² of products. Capacity may vary based on product family, size, and quantity.
Retail, fast-moving consumer goods, cosmetics, telecommunications, promotion, advertising, packaging, publishing, food and beverage, automotive, technology, tourism, events and entertainment.
To be one of the leading developers of communication media that make the visibility of institutions and brands in the physical world more impactful, memorable, and actionable.
Combining lenticular technology with design and production expertise to provide high-quality, attention-grabbing, and measurable physical communication solutions tailored to brands' touchpoints.
Lenticular printing and physical communication media; promotional products; in-store/POS-POSM applications; packaging and label solutions; print products; custom design, prototyping, sampling, and mass production.
Unilens has production capabilities across Turkey and strong shipping capabilities in the TR and European regions.
Germany, Netherlands, Italy, Bosnia and Herzegovina, America, United Kingdom, Montenegro, Czech Republic, Croatia, Australia are our strongest export locations.
Yaklaşık 20.000+ proje, 6.000+ kurumsal işbirliği
Right material and lens selection, controlled color/effect management, pre-production file check and sample, mass production quality control, traceability and on-time delivery are taken as basis.
Unilens is based on the selection of appropriate materials and sizes, planning that reduces waste, recyclable materials in applicable projects, a long service life, and the prevention of unnecessary production.
Corporate slogan: “Activates Visibility.”
Unilens develops physical communication solutions that increase brands' visibility, attention-grabbing power, and memorability by adding motion, depth, and change to physical surfaces using lenticular technology.
Attention-Triggering Physical Communication Media; in-store and point-of-sale visibility solutions; attention-triggering communication promotions; lenticular packaging, labels, posters, showcases, exhibition/event and corporate communication applications; special project development and production. Corporate imported promotional product supply services; custom-produced corporate supply services.
Offset/digital printing, plastic processing, lamination, cutting, packaging and other printing capabilities included in the catalogs
Lenticular notebook, keychain, magnet, ruler, card, business card, bookmark, mousepad, desk accessories and other standard promotional products in the catalog.
Catalogs, brochures, book/magazine covers, cards, invitations, labels, packaging, and custom-cut printed products
Yes. Briefing, effect and material selection, design/file adaptation, digital preview, sampling, production, finishing and delivery processes can be managed end-to-end depending on the project scope.
Unilens should not be positioned merely as a printing supplier; although printing is offered within the scope of the project, its core value proposition is lenticular project development and end-to-end production expertise.
Evet. Yılbaşı, özel gün, lansman, fuar, okul dönemi, yaz sezonu ve kampanya dönemlerine özel ürün grupları oluşturulabilir.
Instead of a single static image, it produces an experience that changes depending on the viewing angle; it creates a perception of motion/change/depth without screens and without requiring energy; it increases the attention-grabbing and memorability potential of the physical surface.
Triggering attention, telling the message step-by-step, presenting before-and-after or two messages on the same surface, increasing product/brand visibility and engagement, creating a premium/innovative perception, and providing screenless visual movement.
Lenticular application can be made on the customer's product/surface after a technical compliance test; material, form, adhesion and usage conditions must be evaluated on a project basis.
Yes. Corporate presentation, lenticular product, and promotional product catalogs are available.
All custom sizes/shapes, special effects, packaging, large format, in-store applications, application on customer's product, and all works requiring project development must be priced via the quote form.
It can be used for launches, product benefit explanations, before-and-after, campaign messages, in-store navigation, packaging differentiation, promotions, collections, education, events, and corporate communication purposes.
Sağ ve sol göze lens yüzeyi üzerinden küçük açı farklarıyla farklı perspektifler gösterilir. Beyin bu perspektifleri birleştirerek gözlüksüz derinlik algısı oluşturur.
Analysis of the brief and conditions of use; selection of effect/lens/material; visual preparation and interlacing; digital preview; proofing/sample; printing and lens alignment; lamination; cutting-finishing; quality control; packaging and shipping.
The parallel micro-lenses on the lens sheet direct different strips of the interlaced image underneath to different viewing angles.
Interlacing is the process of dividing the image or frames to be used into very thin strips suitable for the lens structure and weaving them in a specific order into a single print file.
The image changes according to the viewing angle because the lenses direct different image strips to the eye at different angles.
Lenticular produces shift/depth depending on the viewing angle using a lens sheet and a printed image. A hologram, on the other hand, is a different optical recording technology based on the diffraction/interference properties of light.
Lenticular printing produces optical movement or depth perception on a two-dimensional printed surface, whereas a 3D printer physically produces a volumetric object.
Hayır. Uygunluk; efekt hedefi, kompozisyon, çözünürlük, katman ayrımı, renk/kontrast, ürün ölçüsü ve izleme koşullarına bağlıdır.
Yes; however, depending on the chosen effect, the resolution and layer separation of the photograph must be sufficient, and professional adaptation should be made if necessary.
Yes. A limited number of frames selected from the video can be converted into an animation/motion effect suitable for the viewing angle and product size; the video itself is not printed directly.
Technically, some effects can be combined; however, project-based testing is required due to image clarity, ghosting risk, lens/measurement, and viewing conditions.
A digital simulation can be prepared; however, a screen cannot fully replicate the exact optical behavior of the lens.
The digital preview shows the edit, sequence, and motion logic. The physical sample, on the other hand, verifies the actual lens, color, light, distance, angle, and material performance.
Basic effects: 3D depth, flip/change, animation / zoom movement and morph.
It is a glasses-free depth effect where visual elements are separated into different planes, creating a front-back relationship and a sense of volume.
It is the noticeable transition between two or more visuals/messages when the perspective changes.
It is the creation of a short motion sequence by displaying consecutive frames in order with visual movement.
It is the effect of an image gradually transforming into another image.
It is a sequence of frames that makes an element appear to grow and shrink.
It is a type of animation where an object is perceived as changing direction, position, or posture.
For a clear before/after comparison, a two-image flip is usually suitable; for a stepwise transformation narrative, morph is appropriate.
The two-image flip effect, which provides a strong separation for two separate messages, is suitable.
Depending on the shelf distance and packaging size, strong flip, controlled motion/zoom, and selective 3D effects. The number of messages should be kept low.
On small surfaces, dual-visual flip, simple motion/animation, and 3D if there is sufficient layer separation. The effect should be chosen according to the movement pattern of the product.
flip, animation/motion and 3D can be applied with a lens suitable for the viewing distance.
Low-frame, high-contrast flip and simple motion effects generally yield clearer results on small products.
Technically, more than two visuals are possible; however, 2–3 strong images are recommended in most projects for clarity.
The number of frames varies depending on the lens, scale, and target movement; more frames are not always better. The technical team should determine the optimum number on a project basis.
High resolution, clear foreground/middle/background separation, sufficient visual whitespace, correct perspective, and a layered working file are required.
Evet, bazı projelerde mümkündür; fakat her birleşim net sonuç vermez. Fiziksel numune ile doğrulanmalıdır.
Determined based on the product's handheld/viewing direction, viewer movement, design composition, and lens direction.
Yes. Viewing distance directly affects lens/LPI, detail level, number of transitions, point size, and composition decisions.
The purpose, message count, product size, viewing distance, lighting, viewer movement, application surface, and budget are evaluated together; sample tests are conducted if necessary.
It can be applied to a wide variety of products including cards, magnets, rulers, labels, stickers, posters, panels, notebook/book covers, packaging, invitations, promotional items, desktop products, in-store displays, and custom-cut surfaces; technical suitability is evaluated on a project basis.
Yes.
Yes.
Yes.
Yes.
Yes; the surface, adhesive, and application conditions must be verified.
Yes; the surface, adhesive, and application conditions must be verified.
Yes.
Yes; the maximum dimensions, lenses, installation, and outdoor/indoor conditions must be verified by the technical team.
Yes.
Evet; kutu formu, katlama, yapıştırma ve seri üretim koşulları birlikte tasarlanmalıdır.
Uygun eğrilik, etiket alanı, yapışkan ve uygulama testiyle mümkündür.
Yes.
Yes.
Yes.
When appropriate safety, material, and age group standards are met, lenticular technology can be used in children's products and toys. Necessary certification and compliance conditions are checked on a project basis.
Yes; in areas such as shelf edge, wobblers, stoppers, stands, headers, wayfinding, posters, experience surfaces, and windows.
It is possible if appropriate UV/moisture resistance, lens, and mounting system are selected; the lifespan and warranty should be determined on a project basis.
Lenticular notebooks, desk calendars, magnets, cards/bookmarks, keychains, desktop objects, and brand-specific collection products.
Yes, custom sizes/shapes can be produced subject to mold, material, and minimum quantity conditions.
Evet; ürüne ve yapıya bağlı olarak arka yüz baskısı uygulanabilir.
Yes; depending on the project scope, custom cutting, lamination, gluing, packaging, and kitting can be performed.
Campaign/launch surfaces, creative mail and invitations, sample kits, in-store POSM, indoor/outdoor posters, experiential surfaces, and custom production.
Lenticular notebooks, keychains, magnets, cards, rulers, bookmarks, desktop products, and brand-specific promotions; the category name is "Attention-Triggering Communication Promotions".
Lenticular panels on boxes/sleeves, labels, sleeves, launch packaging, collection packaging, and before-after/transforming surfaces demonstrating product benefits.
Entrance hero zone, showcase, aisle/experience surface, shelf header, stopper, wobbler, shelf talker, checkout counter, product stand, wayfinding, fitting room and campaign communication.
Before-after flip, color/finish change, application step animation, packaging/shelf visibility, tester area, mirror surround, and launch hero zone applications.
Flavor/moment of service movement, packaging transformation, flip among product varieties, shelf and cooler visibility, menu/tabletop, collection promotion and launch surfaces.
Moving character cards, collectible products, educational transformation cards, game components, packaging, and safe promotional products.
Book/magazine cover, children's and educational publications, trading cards, posters, bookmarks, and special edition applications.
Invitations, badges/credentials, booth panels, signage, product demonstrations, promotions, photography/experience areas, and post-visit reminder materials.
/game character posters, convertible stage, collectible card, special edition packaging, ticket/invitation, store/fan experience, and licensed promotion.
Processes, anatomy, geography, transformation, true-false and step-by-step explanations; interactive cards, posters, book covers and classroom materials.
Model/color/feature flips, interior-exterior view transitions, technical layer 3D, product launch kit, showroom, fair and point of sale applications.
3D character/scene, limited edition flip, numbered card, series completion setup and premium packaging.
AI, PDF, PSD
300 DPI
CMYK
3 mm
3D ve hareket uyarlamalarında katmanlı dosya tercih edilir.
PSD
Evet; yazıların font problemi yaratmaması için vektöre çevrilmesi önerilir.
The usage/copyright must belong to the client or the license must be documented.
For the flip, each message must be submitted as a separate, high-resolution file; the optimum number of visuals is determined on a project basis.
Limited improvements can be made to low-resolution images. However, it is not possible to fully restore details that are missing from the source file.
Yes. Customer files are checked for technical compliance before production.
Yes. The existing visual can be adapted for lenticular printing after a technical suitability analysis. The scope and fee of the work are determined on a project basis.
Strategic implementation analysis studies specific to the institution are subject to a fee. Creative design support is charged separately.
The pre-press design work is shared with the requesting institution. It is processed upon the institution's approval.
Yes, they can be made.
Yes.
Dimensions/shape, quantity, lens/material, effect and frame count, design/interlacing requirement, printing/finishing, packaging, sample, delivery time and logistics.
Malzeme tüketimi, baskı yerleşimi, fire, lens seçimi ve sonlandırma nedeniyle etkiler.
As the quantity increases, setup and mold costs are distributed across units, so the unit price decreases significantly.
Efekt kullanım farklılıkları fiyatı etkilememektedir.
Yes; lens type, LPI, supply, and project requirements can affect the cost.
Requests such as creative design / interlacing / file adaptation are charged extra.
Evet; ürün, ölçü, malzeme, üretim yöntemi ve sonlandırmaya göre değişir.
Single production can be done within the scope of prototypes or samples. Commercial single production is evaluated according to the nature of the project.
Proje ve üretim yöntemine göre mümkündür.
Dosya, kalıp, lens ve üretim koşulları değişmediyse tekrar siparişlerde maliyet avantajı oluşabilir. Koşullar her tekrar sipariş öncesinde kontrol edilir.
If capacity and supply are available, urgent production can be provided for an additional fee.
Product/application type, area of use, dimensions, quantity, effect/message, target date, delivery location, design file status, packaging, and special expectations.
For requests submitted with a complete brief, an initial response is targeted within 1 business day at the latest. For technical or special projects, the scope and quote are aimed to be shared within 2 business days at the latest.
50% in advance upon order confirmation, and the remaining 50% is collected upon delivery of the work.
Unless there is an unexpected change in raw material or foreign currency costs, the validity period of the offers is 15 days.
Sample pricing policy varies depending on the product and project.
Shipping/transportation costs are the responsibility of the customer.
The standard production time is 7 business days, which may vary depending on the order quantity and production workload.
Production time begins after the quotation/payment, print-ready file, and written sample/digital approval are completed.
Evet. Tasarım ve revizyon süresi, üretim termin süresine dahildir.
It is a maximum of 7 working days.
Riskli/özel projelerde fiziksel numune üzerinden onay önerilir. Zorunlu değildir.
Yes; quantity, size, material, effect, finishing, and packaging affect the lead time.
Progress is made by obtaining mutual confirmation from the customer at the stages of order receipt, file approval, sample, production, quality control, and shipment.
Standard and special packaging options vary depending on the product.
Shipment can be provided with all logistics options such as contracted cargo, warehouse, palletized shipment, air/land/sea.
Transit time from production varies depending on the country, customs, and method.
Yes.
PET , PETG
Depending on the area and surface to be applied, the lenses to be used in the application show technical differences.
LPI (lens per inch) is the number of lenticules/lens lines per inch; it affects image resolution and viewing character.
No.
Production is made with 75 LPI, 60 LPI, 62 LPI, 40 LPI, 20 LPI, 25 LPI materials.
Ölçü, izleme mesafesi, efekt, baskı yöntemi ve malzemeye göre seçilir.
Yes.
Yes.
UV resistance and fading performance may vary depending on the area of use and light exposure. Like any printed communication material, lenticular prints can be adversely affected by prolonged exposure to sunlight.
Yes.
The products are suitable for long-term use.
There is a protective lamination/coating application.
Durability is enhanced with UV printing/high protection printing inks.
Üretim öncesi kalibrasyon, profil, prova/numune ve seri kontrol prosedürleri sağlanarak hedeflenen renk doğruluğu sağlanır.
It is reduced through proper pitch/lens calibration, interlacing, alignment, angle/frame rate, and sample testing.
Production quality standard is standardized through approved samples, process parameters, intermediate checks, and final quality control.
Yes. The polyester material used in Lenticular production has a #1 resin identification code and is recyclable. It is also possible to recycle suitable material scraps generated during production.
Yes. The polyester material used is recyclable; it is also free of BPA and chlorine. According to the manufacturer's declaration, the material does not contain components from the REACH candidate list of substances of very high concern at concentrations of 0.1% or above. These features provide an advantage for projects requiring more responsible material choices.
The fact that the polyester material used is free of BPA and chlorine is an important advantage. However, current documents do not provide a specific compliance certificate such as EN 71, toy safety, or similar regarding the use of the material in toys or children's products. For projects aimed at children, necessary additional tests and compliance checks should be performed specifically for the project by evaluating the usage method, age group, and contact conditions of the product.
Yes. There is a technical product information sheet prepared by the manufacturer for the polyester material used, as well as a REACH/SVHC conformity declaration. The documents include information on the recyclability of the material, the absence of BPA and chlorine, technical strength properties, and substances under REACH. Upon request, available technical documents can be shared within the scope of the project.
Germany, Netherlands, Italy, Bosnia and Herzegovina, America, England, Montenegro, Czech Republic, Croatia, Australia are our strongest export locations.
Coaster, Spiral Notebook, Bottle Opener, Mousepad, Poster, Sticker, Magnet, Outdoor Advertising Products
Our payment, customs liability, freight and transit time policy complies with EU standards.
No.
EUR and/or USD
EUROFİNS, FSC, ISO 9001, 14001, 45001,10002
Choosing the effect over the purpose; overloading a small surface with too many frames; failing to account for viewing direction/distance; using low contrast between messages; sending non-layered visuals for 3D.
Low resolution, missing bleed, text without fonts/vectors, unlayered file, wrong color mode, insufficient image rights, inappropriate composition, and failure to specify the final dimension.
Lack of brief/file, number of designs and revisions, sample/approval time, size/quantity, lens/material supply, special cut/finishing, packaging and logistics.
It is distinguished by clear transition/depth, low ghosting, accurate color and alignment, homogeneous lens, clean cutting/lamination, correct viewing angle, consistency throughout the series, and material suitable for the conditions of use.
Due to lenticular expertise, manufacturing experience since 1996, end-to-end design and production management, wide application scale, project-specific technical guidance, and quality control approach.
Special projects starting from brand objectives and touchpoints; in-store/POSM; physical communication media going beyond promotions; multi-component special production; jobs requiring effect-material-dimension optimization.
Unilens Lenticular Promosyon Matbaa Hiz. İth. İhr. Ltd. Şti.
Halil Rıfat Paşa Mah. Yüzer Havuz Sk. Perpa Ticaret Merkezi A Blok Kat:11 No:1676 Şişli -İstanbul
We are open every weekday between 09:00 and 18:30.
Lenticular results depend not only on print quality, but also on the harmony of composition, resolution, layer separation, effect target, scale, lens, and viewing conditions. The file undergoes a technical evaluation and is adapted if necessary.
Our coaster production time is 12-15 business days
